Enterasys Networks XSR CLI no shutdown

Other ADSL Commands
13-94 Configuring ADSL
Syntax
ip address {ip-address/subnet-mask | negotiated}
Syntax of the “no” Form
Thenoformofthiscommandreturnsthisparametertoitsdefaultsetting:
no ip address
Mode
ATMSub‐Interfaceconfiguration:XSR(config-if<ATMxx.x>)#
Default
•IPaddress:0.0.0.0
•Subnetmask:0.0.0.0.
Example
Thisexamplesetsthesub‐interfaceIPaddressto10.1.1.1andthesubnetmaskto255.0.0.0:
XSR(config-if<ATM0/1/0.1>)#ip address 10.1.1.1 255.0.0.0
or
XSR(config-if<ATM0/1/0.1>)#ip address 10.1.1.1/8
no shutdown
ThiscommandsetstheATMsub‐interfacetotheadministrativeUpstate(no shutdown)and
enablesthevirtualcircuit.
TheassociatedATMinterfacemustbeintheadministrativeUpstate(no shutdown)beforeano
shutdownonasub‐interfaceisexecuted.
Syntax
no shutdown
Mode
ATMSub‐Interfaceconfiguration:XSR(config-if<ATMxx.x>)#
Example
ThefollowingexamplesetstheATMsub‐interfacetotheadministrativeupstate:
XSR(config-if<ATM0/1/0>)#no shutdown
ip-address TheIPaddressassociatedwiththissub‐interfaceintheform:A.B.C.D.
subnet-mask Thesubnetmaskbitsrepresentsthenumberofbitssetto1inthesubnet
mask,rangingfrom0to32.
negotiated IPaddress/subnetmaskarenegotiatedbyPPP.Thisvaluecannotbeset
whenusingIPoAencapsulation.