Enterasys Networks XSR CLI User Guidelines

Other Platform Commands
XSR CLI Reference Guide 3-89
Syntax of the “no” Form
Usethenoformofthiscommandtodisabletheearlierconfiguredservice:
no logging [console | buffered | monitor | snmp | A.B.C.D | file | timestamp]
Mode
GlobalConfiguration:XSR(config)#
Defaults
•File:off
• A.B.C.D.:0.0.0.0(nomessagessentuntilanIPaddressisset)
• Logginglevel:Highforalldestinations
User Guidelines
Thetablebelowdisplaysstandardsyslogerrormessagetypesanddefinitions.
TheXSRrecognizesmessagesatfourlevels,describedinthetablebelow:
medium SetssystemlogtoMediumlevel.
low SetssystemlogtoLowlevel.
debug SetssystemlogtoDebuglevel.
timestamp Setstimeanddate.
local Setstimestamptolocaltime.
utc SetstimestamptotheUniversalTimeClock.
Message Type Definition
0: Emergency System is unusable
1: Alert Action must be taken immediately
2: Critical Critical conditions
3: Error Error conditions
4: Warning Warning conditions
5: Notice Normal but signification condition
6: Info Informational
7: Debug Debug-level messages
8: Security Security related messages
Priority Code = Facility Code *8 + Severity
Severity User Level Message
(Facility = 1)
Security/Auth Message
(Facility = 10)
High, severity = 2 (Critical) 10 82
Med, severity = 3 (Error) 11 83
Low, severity = 4 (Warning) 12 84