Enterasys Networks XSR CLI vrrp <group> priority

Virtual Router Redundancy Protocol Commands
XSR CLI Reference Guide 5-195
Mode
Interfaceconfiguration:XSR(config-if<xx>)#
Examples
Thefollowingexampleenablespreemptforvirtualroutergroup1witha2‐seconddelaysetonF1:
XSR(config)#interface fastethernet 1
XSR(config-if<F1>)#vrrp 1 preempt delay 2 or vrrp preempt delay 2
ThefollowingexampledisablesthepreemptforVRgroup1onF1:
XSR(config-if<F1>)#no vrrp 1 preempt or no vrrp preempt
vrrp <group> priority
Thiscommandsetsthepriorityleveloftherouterwithinavirtualgroup.Useittocontrolwhich
routerbecomesthemasterVR.
Syntax
vrrp group priority level
Syntax of the “no” Form
Thenoformofthiscommandrestoresthedefaultvalue:
no vrrp group priority
Defaults
•Level:ThepriorityoftheIPaddressowneris255,otherwisethedefaultis100.
•Group:1,rangingfrom1to255
Mode
Interfaceconfiguration:XSR(config-if<xx>)#
Examples
Thisexamplesetspriority150forVRgroup1onF1:
XSR(config)#interface fastethernet 1
XSR(config-if<F1>)#vrrp 1 priority 150 or vrrp priority 150
ThefollowingexamplesetsprioritytodefaultforVRgroup1onF1:
XSR(config-if<F1>)#no vrrp 1 priority or no vrrp priority
group VRgroupnumber.
level PriorityoftherouterwithintheVRRPgroup.Range:1to254.