Enterasys Networks XSR CLI Parameters in the Interface Response

ATM Clear and Show Commands
XSR CLI Reference Guide 13-109
The logical link is currently Up
The Name of the Access Concentrator is ENTERASY-CDDU1S
The Session Id is 0x000b
The MAC Address of the Access Concentrator is 0x00:60:f9:11:01:08
The MTU is 1492
The name of this device is adsl-0
Administrative state is ENABLED
Operational State is UP
Circuit monitoring enabled
VPI is 1.
VCI is 32.
ifindex 0
ifType 0
ifAdminStatus 1
ifOperStatus 1
ifLastChange 00:02:34
ifInOctets 20510
ifInUcastPkts 408
ifInNUcastPkts 0
ifInDiscards 0
ifInErrors 0
ifInUnknownProtos 0
ifOutOctets 37728
ifOutUcastPkts 388
ifOutNUcastPkts 0
ifOutDiscards 0
ifOutErrors 0
ifOutQLen 100
Parameters in the Interface Response
ATM 1/0 is Admin Up / Oper Up Administrativestate:AdminUporAdminDownand
Operationalstate:OperUporOperDown.
The name of this device is adsl-0 Hardwaredevicename.
Administrative State is ENABLED Driveradministrativestate:ENABLEDorDISABLED.
Operational State is UP DriveroperationalstateisUPorDOWN.
OAM circuit is UP DriverOAMchannelstateisUPorDOWN.
The upstream data rate is 480 kbit/
sec.
Negotiatedupstreamdatarate.
The downstream data rate is 10208
kbit/sec.
Negotiateddownstreamdatarate.