Enterasys Networks XSR CLI OSPF Debug and Show Commands debug ip ospf dr, debug ip ospf packet

OSPF Debug and Show Commands
5-104 Configuring the Internet Protocol
OSPF Debug and Show Commands
debug ip ospf dr
ThiscommanddebugsOSPFdesignatedrouterevents.AswithallXSRdebugcommands,itisset
toprivilegelevel15bydefault.
Syntax
debug ip ospf dr
Syntax of the “no” Form
Thenoformofthiscommandreturnsthedebugfunctiontothedefault:
no debug ip ospf dr
Mode
EXECconfiguration:XSR>
Example
Thefollowingexampleindicatestheelectionofadesignatedrouter:
OSPF: Elect DR. dr:53.53.53.21 bdr:53.53.53.6 GigabitEthernet 2
Parameter Descriptions
debug ip ospf packet
ThiscommanddebugsreceivedandtransmittedOSPFpackets.AswithallXSRdebug
commands,itissettoprivilegelevel15bydefault.
Syntax
debug ip ospf packet
Note: This command does not display in running config because it is a debug function. It must be
set manually every time the XSR is rebooted.
ElectDR OSPFDRElection.
dr:53.53.53.21 Designatedrouter.
bdr:53.53.53.6 BackupDesignatedrouter.
GigabitEthernet2Interfaceonwhichthedesignatedrouterresides.
Note: This command does not display in running config because it is a debug function. It must be
set manually every time the XSR is rebooted.