Enterasys Networks XSR CLI show ppp interface

PPP Debug, Clear and Show Commands
8-102 Configuring the Point-to-Point Protocol
Mode
EXECorGlobalconfiguration:XSR> or XSR(config)#
Sample Output
Thefollowingoutputisproducedbythiscommand:
Serial 1/0 is Admin Up / Oper Up
Internet address is 25.25.25.3, subnet mask is 255.255.255.0
LCP State: OPENED
IPCP State: OPENED
Multilink State: OPENED
show ppp interface
ThiscommanddisplaysallconfiguredPPPinstances,theinterfacetheybelongtoandtheirstatus.
Toissuethiscommandcorrectly,followtheguidelinesbelow:
•Issuingtheshow ppp interfacecommandwithoutanyotherparameterdisplayslinkstatus,
statisticsandconfigurationforallinterfacesrunningPPP.
•Theshow ppp interfacetypecommanddisplayslinkstatus,statisticsandsettingsforany
interfacetyperunningPPP.
•Theshow ppp interfacetype number commanddisplayslinkstatus,statisticsand
configurationfortheinterfacetypenumber.
•Theshow ppp interfacedialer number [multi-class serial] commanddisplays
DialerstatisticswithSerialandMulticlassoptions.
•Theshow ppp interfacemultilink number [bap | memberlink | multi-class]
commanddisplaysmultilinkstatisticswithvariousoptions.
Syntax
show ppp interface card/port [type number options]
TheSerialportcard,port,sub‐interface,andchannelnumbersareexpressedasfollows:
card/port TheNIMnumberandPPPWANport:channelnumbertoviewassociatedlink
status,statisticsandsettings.
type TheinterfacetypePPPisrunningonincluding:Dialer(0to255),Multilink(1to
32767),orSerial(seebelow).
number Card/portnumbersorCard/port:channelnumber.
option memberlink,mlpppgroup(MLPPPonly),multi‐class,orbap(MLPPPonly)
statistics.
0Consoleport.
<1-2>/<0-3> Cardandportnumber.
<1-2>/<0-3>.<1-30> Card,port,sub‐interfacenumber.
<1-2>/<0-3>:<0-31> Card,portandchannelnumber.
<1-2>/<0-3>:<0-31>.<1-30> Card,port,channelandsub‐interfacenumber