Enterasys Networks XSR CLI show interface dialer, show interface fastethernet

Hardware Controller Clear and Show Commands
4-100 Configuring Hardware Controllers
show interface dialer
ThiscommanddisplaysinformationabouttheDialerinterface.
Syntax
show interface dialer [number]
Mode
PrivilegedEXECorGlobalconfiguration:XSR# orXSR(config)#
Sample Output
ThefollowingexampledisplaysinformationaboutDialerinterface3:
XSR#show interface dialer 3
********** Dialer Interface Stats **********
Dialer3 is Admin Down
Internet address is not assigned
Dialer3
Dialer state is: DOWN
Wait for carrier default: 60, default retry: 3
Dial String Success Failures Map Class
Free pool ISDN channels: <0>
Free pool serial ports: <0>
show interface fastethernet
ThiscommanddisplaysinformationaboutaFastEthernetinterface.Thisinterfaceisavailableon
theXSR1800Seriesroutersonly.
Syntax
show interface fastethernet [number]
Mode
PrivilegedEXECorGlobalconfiguration:XSR# orXSR(config)#
Sample Output
ThefollowingissampleoutputfromFastEthernetinterface1:
XSR#show interface FastEthernet 1
FastEthernet1 is Admin Up
Internet address is 51.51.51.1, subnet mask is 255.255.255.0
Internet address is 52.52.52.1, subnet mask is 255.255.255.0 Secondary
Internet address is 53.53.53.1, subnet mask is 255.255.255.0 Secondary
number Dialerinterfacenumber,rangingfrom0to255.
number FastEthernetinterfacenumberof1or2.