Enterasys Networks XSR CLI snmp-server window-time

snmp-server Commands
XSR CLI Reference Guide 1-33
snmp-server window-time
Thiscommandspecifiesthelength,inseconds,ofthemovingwindowusedtocountthenumber
oftrapssent.
Syntax
snmp-server window-time time
Syntax of the “no” Form
Thenoformofthiscommandsetsthelengthofthemovingwindowusedtocountthenumberof
trapssentinrecentlytodefault:
no snmp-server window-time
Mode
Globalconfiguration:XSR(config)#
Default
10seconds
Example
Thefollowingexamplesetsthemovingwindowintervaltotenminutes:
XSR(config)#snmp-server window-time 600
snmpMPDMIB 1.3.6.1.6.3.11
snmpUsmMIB 1.3.6.1.6.3.15
snmpVacmMIB 1.3.6.1.6.3.16
snmpEngine 1.3.6.1.6.3.10.2.1
snmpMPDStats 1.3.6.1.6.3.11.2.1
usmStats 1.3.6.1.6.3.15.1.1
usmUser 1.3.6.1.6.3.15.1.2
usmUserTable 1.3.6.1.6.3.15.1.2.2
vacmContextTable 1.3.6.1.6.3.16.1.1
vacmSecurityToGroupTable 1.3.6.1.6.3.16.1.2
vacmAccessTable 1.3.6.1.6.3.16.1.4
vacmMIBViews 1.3.6.1.6.3.16.1.5
vacmViewTreeFamilyTable 1.3.6.1.6.3.16.1.5.2
Table 1-2 MIB Names for SNMP View Commands (continued)
SNMP Term SNMP Numerical ID
time Timewindowinterval,rangingfrom1to3,600seconds.