Enterasys Networks XSR CLI show interface loopback, show interface multilink

Hardware Controller Clear and Show Commands
XSR CLI Reference Guide 4-103
ifLastChange 00:00:00
ifInOctets 0
ifInUcastPkts 0
ifInNUcastPkts 0
ifInDiscards 0
ifInErrors 0
ifInUnknownProtos 0
ifOutOctets 0
ifOutUcastPkts 0
ifOutNUcastPkts 0
ifOutDiscards 0
ifOutErrors 0
ifOutQLen 256
show interface loopback
Thiscommanddisplaysinformationabouttheloopbackinterface.
Syntax
show interface loopback [number]
Mode
PrivilegedEXECorGlobalconfiguration:XSR# orXSR(config)#
Sample Output
ThefollowingissampleoutputfromLoopbackinterface5:
XSR#show interface loopback5
Loopback5 is Admin Up
Description: My loopback interface
Internet address is 57.57.57.57, subnet mask is 255.255.255.0
show interface multilink
ThiscommanddisplaysinformationabouttheMultilinkinterface.
Syntax
show interface multilink [number]
Mode
PrivilegedEXECorGlobalconfiguration:XSR# orXSR(config)#
Sample Output
ThefollowingissampleoutputfromMultilinkinterface8:
number Loopback address number ranging from 0 to 15.
number Multilink address number, ranging from 1 to 32767.