Enterasys Networks XSR CLI manual type

SLA Agent Commands
1-42 Network Management
Syntax of the “no” Form
Thenoformofthiscommandreturnstothedefaultvalue:
no timeout
Mode
RTREchoconfiguration:XSR(config-rtr-echo-xx)#
Default
5000milliseconds
Example
ThefollowingexampleresetstheRTRtimeoutto500milliseconds:
XSR(config-rtr-echo-57)#timeout 500
type
ThiscommandspecifiesthetypeofResponseTimeReporter(RTR)measurementtobeperformed
‐ICMPEcho‐aswellasthedestinationandsourcehostIPaddresses.
Syntax
type {echo} protocol {ipIcmpEcho} dst [source-ipaddr src]
Mode
RTRconfiguration:XSR(config-rtr-xx)
Next Mode
RTREchoconfiguration:XSR(config-rtr-echo-xx)
Example
ThefollowingexamplesetstheRTRtypeandacquiresRTREchomode:
XSR(config-rtr-57)#type echo protocol ipIcmpEcho 192.168.57.3
XSR(config-rtr-echo-57)
dst IPaddressofthedestinationhost.
src IPaddressusedasthesource.