Enterasys Networks XSR CLI Configuring ADSL

XSR CLI Reference Guide 13-83
13
Configuring ADSL
Observing Syntax and Conventions
TheCLIcommandsyntaxandconventionsusethenotationdescribedbelow.
ADSL Configuration Commands
ThefollowingcommandsetsdefineADSLfunctionalityontheXSRincluding:
•“CMVCommands”onpage 13‐83.
•“OtherADSLCommands”onpage 13‐87.
•“PPPConfigurationCommands”onpage 13‐99.
•“AT M ClearandShowCommands”onpage 13‐103.
CMV Commands
cmv append
ThiscommandaddsaCommandManagementVariable(CMV)totheDSPtraininglistwhichis
usedbytheDSPfirmwarewhenthelineisintrainingmode.Thiscommandisintendedforuseby
Enterasysfieldservicepersonnelonly.ThiscommandrequiresthattheADSLNIMbeinstalled
andtheDSPfirmwarefilebepresentintheFlash:directory.
Convention Description
xyz Key word or mandatory parameters (bold)
[x][ ] Square brackets indicate an optional parameter (italic)
[x | y | z][ | ] Square brackets with vertical bar indicate a choice of values
{x | y | z}{ | } Braces with vertical bar indicate a choice of a required value
[x {y | z} ] [{ | } ] Combination of square brackets with braces and vertical bars indicates a
required choice of an optional parameter
(config-if<xx>)xx signifies interface type and number, e.g.: F1, S2/1.0, D1, M57, L1,
ATM0/1/1
Next Mode entries display the CLI prompt after a command is entered.
Sub-command headings are displayed in red, italicized text.
soho.enterasys.com Italicized, non-syntactic text indicates either a user-specified entry or text with
special emphasis