Enterasys Networks XSR CLI map-class dialer, modem-init-string

Dialer Interface Commands
XSR CLI Reference Guide 10-89
XSR(config-if<D3>)#dialer-group 7
XSR(config-if<D3>)#access-list 101 permit ip 0.0.0.0 255.255.255.255 255.255.255.255
0.0.0.0
XSR(config)#dialer-list 7 protocol ip list 101
map-class dialer
Thiscommanddefinesthedialstringʹscharacteristicsandassociatesthemwithauniqueclass
name.Oncethemap-class dialer classnamecommandisexecutedtheparametersassignedto
thatclassnamemustbeconfigured.Theclassnameassignedmustmatchtheclassnameassignedto
thedialerstringclassclassnamesothey���canbelinked.
Syntax
map-class dialer classname
Default
None‐noclassname
Mode
Globalconfiguration:XSR(config)#
Next Mode
Map‐ClassDialerconfiguration:XSR(config-map-class<xx>)#
Example
Theexamplebelowspecifiesa90‐secondwaittimeforthecarriersignalofthedialermapclass
TESTonDialerport0:
XSR(config)#interface dialer 0
XSR(config-if<D0>)#ip address 196.16.25.1 255.255.255.0
XSR(config-if<D0>)#encapsulation ppp
XSR(config-if<D0>)#dialer remote-name sitea
XSR(config-if<D0>)#dialer string 4165555584 class TEST
XSR(config-if<D0>)#dialer pool 1
XSR(config-if<D0>)#no shutdown
XSR(config)#map-class dialer 57
XSR(config-map-class<57>)#dialer wait-for-carrier-time 90
modem-init-string
ThiscommandsetsanATcommandstringusedtoinitializeamodem.
Syntax
modem-init-string word
classname Unique class identifier.
word Text to initialize the modem.