Enterasys Networks XSR CLI no sntp-server, show sntp

SNTP Commands
XSR CLI Reference Guide 3-93
no sntp-server
ThiscommanddisablestheSNTPserver.
Syntax
no sntp-server
Mode
Globalconfiguration:XSR(config)#
show sntp
ThiscommanddisplaysthecurrentstatusoftheSNTPserver.
Syntax
show sntp
Output
XSR>show sntp
SNTP server Stratum #Polls Last Receive
30.10.1.22 10 1 00:36:39 Active Unicast
1.1.1.1 0 0 Never… Unicast
Client Status: Enabled
Server Status: Enabled
Poll Interval: 512
Server requests: 125
Current Time: 00:36:42-UTC-Tuesday, 30-MAR-2004
Parameter Descriptions
Clockissynchronized,stratum10,referenceis<RTCorlastsynchronizedreference>
SNTP server
30.10.1.22
TheIPaddressofthedesignatedSNTPserver.
Stratum Levelofthenetworkwheretheclockislocated.Theprimarystratumis
generallyconsideredatstratum1.TheXSRdefaultstratumis10.
#Polls SumofclientrequeststotheSNTPserver.
Last Receive Hour,minuteandsecondofthelastclientreplyfromtheSNTPserver.
Active WhethertheSNTPisinactivestate.
Unicast SNTPserverpoint‐to‐pointmode.
Client Status StateoftheSNTPclient‐enabledordisabled.
Server Status StateoftheSNTPserver‐enabledordisabled.
Poll Interval IntervalinsecondsbetweenclientrequeststotheSNTPserver.
Server requests Sumofclientrequeststotheserver.