Enterasys Networks XSR CLI - page 516

Other ADSL Commands
13-90 Configuring ADSL
Defaults
•Backup:Disabled
•VPN:Disabled
•Description:Settotheemptystring
•Encapsulation:None
•IP:Notconfigured
•PPP:Notconfigured
•OAMprocedures:Disabled
•ATMPVCVPI/VCI:Setto1/32
•Thesub‐interfacewillbeintheshutdownstate
Example
ThefollowingexamplecreatesanATMsub‐interfaceobjectonATMinterfaceslot0,card1,port1:
XSR(config)#interface atm 0/1/1.1 point-to-point
XSR(config-if<ATM0/1/1.1>)#
backup
ThiscommandconfiguresandenablesabackupinterfaceforthisATMsub‐interface.This
commandrequiresaproperlyconfiguredATMsub‐interfaceandDialergroup.
Syntax
backup {delay down-wait {up-wait | never} | interface dialer id | time-range
begin-hh:mm end-hh:mm}
Syntax of the “no” Form
ThenoformofthiscommanddisablesabackupforthisATMsub‐interface:
no backup {delay | interface | time-range}
Mode
ATMSub‐Interfaceconfiguration:XSR(config-if<ATMx/x/x.x>)#
down-wait Secondstowaitbeforeswitchingtothebackupinterface.
up-wait |
never
SecondstowaitbeforeswitchingbacktoATMinterface.Ifsettonever,it
willremainonthebackupinterface.
id DialertouseforbackupwhenATMinterfaceisdown.
begin-hh:mm TimeofdaytoswitchtothebackuplineregardlessofATMinterfacestate.
end-hh:mm Timeofdaytoreverttonormalinterfacebackupprocedures.