Enterasys Networks XSR CLI - page 523

Other ADSL Commands
XSR CLI Reference Guide 13-97
Syntax
pvc vpi/vci
Syntax of the “no” Form
Thenoformofthiscommandreturnsthisparametertoitsdefaultsetting:
no pvc
Mode
ATMSub‐Interfaceconfiguration:XSR(config-if<ATMx/x/x.x>)#
Default
VPI/VCIdefaultsto1/32.ThisisnottheILMIvirtualcircuit.
Example
Thisexamplesetsthesub‐interfacecircuittypetoPVCandsetstheATMVPI/VCIvaluesto2/48:
XSR(config-if<ATM0/1/0.1>)#pvc 2/48
shutdown
ThiscommandsetstheATMsub‐interfacetotheadministrativeDownstatehaltingalldatatraffic
onthisVC.
Syntax
shutdown
Syntax of the “no” Form
Refertotheatm sub-interface commandonpage13‐88.
Mode
ATMSub‐Interfaceconfiguration:XSR(config-if<ATMx/x/x.x>)#
Example
ThefollowingexamplesetstheATMsub‐interfacetotheadministrativedownstate:
XSR(config-if<ATM0/1/0.1>)#shutdown
vpi/vci ATMVCidentifiervalues.VPIrange:0to255,VCIrange:0to65535.