Enterasys Networks XSR CLI manual show tcp

IP Clear and Show Commands
5-180 Configuring the Internet Protocol
Parameter Description
show tcp
ThiscommanddisplaysTCPstatistics.
Syntax
show tcp {connections | general}
Configuration Mode
EXECorGlobalconfiguration: XSR> or XSR(config)#
Sample Output
Thefollowingaresampleresponses:
Connection Table
XSR>show tcp connections
-----------TCP Statistics-----------
Current Connections
Local Address Foreign Address Connection State
134.141.235.165.23 134.141.235.124.1573 ESTAB
134.141.235.165.23 134.141.235.150.1588 ESTAB
General Information Display
XSR>show tcp general
-----------TCP Statistics-----------
TCP General Infomation
Maximum number of TCP connections is dynamic
2 connections in state ESTABLISHED or CLOSE-WAIT
Retransmission timeouts: min 220ms; max 684 ms
Rcvd: 870 total
0 errors
Sent: 701 total
2 retransmitted
1 containing the RST flag
0 transitions from CLOSED to SYN-SENT
64MgB AmountofmemoryinstalledintheXSR.
Resource Table,tableentry,user,orSNMPcategory.
ResourcesInUse Sumofentriescurrentlyinuse.
BytesPerResource Sum(inbytes)ofmemoryinusebyeachentry.
TotalBytesInUse Sum(inbytes)ofmemorycurrentlyusedbythisresource.
connections Asummaryconnectionsdisplay.
general Adetailedgeneralinformationdisplay.