Enterasys Networks XSR CLI interface atm, interface atm sub-interface

Other ADSL Commands
13-88 Configuring ADSL
interface atm
ThiscommandcreatesanATMinterfaceobjectanditsassociateddevicedriverwhichdownloads
thespecifiedfirmwarefiletotheon‐boardDSP.DependingonthesizeoftheDSPfirmwareand
thecharacteristicsofthedownloadprocedure,thisproceduremaytakeanoticeableamountof
time.Afterasuccessfulload,theinterfaceanddevicedriverisintheadministrativedownstate
(shutdown).
Syntax
interface atm {slot/card/port}
Syntax of the “no” Form
Thenoformofthiscommandremovestheinterfaceobjectandallassociatedsub‐interfaceobjects.
Theinterfacemustbeshutdownfirst.
no interface atm {slot/card/port}
Mode
Globalconfiguration:XSR(config)#
Next Mode
ATMInterfaceconfiguration:XSR(config-if<ATMxx>)#
Example
ThefollowingexamplecreatesanATMinterfaceonslot0,card1,port1:
XSR(config)#interface atm 0/1/1
XSR(config-if<ATM0/1/1>)#
interface atm sub-interface
ThiscommandcreatesanATMsub‐interfaceobjectandassociatesitwithitsATMinterfacepeer.
Setupofinternaldatapaths,whichwillrouteanIPinterfacetotheATMsub‐interface,will
continueasconfigurationproceedsandano shutdowncommandhasbeenissuedagainstthis
sub‐interfaceinstance.Onsuccessfulconstruction,thesub‐interfaceisintheadministrativedown
state(shutdown).
ThiscommandrequiresthattheADSLNIMbeinstalled,theDSPfirmwarefilebepresentinthe
Flash:directory,andtheATMportbeproperlyconfigured.
Thefollowingcommandsaresub‐commandsofatm sub-interface:
Caution: This command requires that the ADSL NIM be installed and the DSP firmware file be
present in the Flash: directory.
slot TheXSRslotnumber,rangingfrom0to2.
card TheXSRNIMnumber,rangingfrom1to2.
port TheXSRslotnumber:0.Thesub‐interfacenumberrangesfrom1to30.