Enterasys Networks XSR CLI client-class

DHCP Commands
15-84 Configuring DHCP
Syntax of the “no” Form
Usethenoformofthiscommandtodeletethebootimagename:
no bootfile
Mode
Anyofthefollowingcommandmodesareavailable:
DHCPpoolconfiguration:XSR(config-dhcp-pool)#
DHCPhostconfiguration:XSR(config-dhcp-host)#
DHCPclientclassconfiguration:XSR(config-dhcp-class)#
Example
Thefollowingexamplespecifiesrobobootasthenameofthebootfile:
XSR(config-dhcp-pool)#bootfile roboboot
client-class
ThiscommandspecifiesthenameofaDHCPclientclass.TheXSRaggregatesDHCPclientswhich
willsharethesameconfiguredattributes.AddingaclientclasstodifferentDHCPpoolsinnot
permitted.Forexample,youcannotaddclientclassmarketingtobothpool1andpool2.
Syntax
client-class name
Syntax of the “no” Form
Usethenoformofthiscommandtoremovetheclientclass:
no client-class name
Mode
Eitherofthefollowingcommandmodesareavailable:
DHCPpoolconfiguration:XSR(config-dhcp-pool)#
DHCPhostconfiguration:XSR(config-dhcp-host)#
WhenspecifiedfromDHCPpoolconfigurationmode,theCLIacquiresDHCPclassconfiguration
sub‐mode:XSR(config-dhcp-class)#
WhenspecifiedfromDHCPhostconfigurationmode,theCLIdoesnotacquireanewsub‐mode.
Note: Adding a client class to different DHCP pools in not permitted. For example, you cannot add
client class marketing to both pool1 and pool2.
name Designation of the client class using standard ASCII characters.