Enterasys Networks XSR CLI manual clear ppp

PPP Debug, Clear and Show Commands
XSR CLI Reference Guide 8-99
Syntax of the “no” Form
ThenoformofthiscommandremovesPPPdebuggingontheinterface:
no ppp debug packet
Default
Limit:100packets
Mode
Interfaceconfiguration:XSR(config-if<xx>)#
Example
ThisexamplesetsPPPdebuggingofIPCPandLQMpacketswitha50‐packetlimitonSerial1/0:
XSR(config)#interface serial 1/0
XSR(config-if<S1/0>)#encapsulation ppp
XSR(config-if<S1/0>)#ppp debug packet limit 50 ipcp lqm
Sample Output
ThefollowingdebuggingoutputisdisplayedonMultilinkinterface57:
XSR#show interface multilink 57
********** Multilink Interface Stats **********
Multilink 57 is Admin Up
Internet address is 192.168.34.1, subnet mask is 255.255.255.0
LCP State: OPENED
IPCP State: OPENED
Multilink State: OPENED
Detailed Debug PPP Control Packet is ON for [type1] [type2] [type3], limit is [x],
number decoded is [y]
clear ppp
ThiscommandclearsPPPcountersforinterfacesrunningPPP.
Syntax
clear ppp
Mode
PrivilegedEXEC:XSR#
Sample Output
Thefollowingoutputdisplayswhenyouentertheshow ppp interfacecommandafterclearing
theserial1/0:0port: