Enterasys Networks XSR CLI frame-relay lmi-t392dce, frame-relay lmi-n392dce

Frame Relay Commands
XSR CLI Reference Guide 9-91
frame-relay lmi-t392dce
ThiscommandsetspollingverificationtimeronaDataCommunicationsEquipment(DCE)
interface.ThetimermarksthedurationthattheDCEexpectstoreceiveaStatusEnquiryfroma
DTEdevice.
Syntax
frame-relay lmi-t392dce period_in_sec
Syntax of the “no” Form
Thenoformofthiscommandrestoresthedefaultinterval:
no frame-relay lmi-t392dce
Default
15seconds
Example
ThefollowingexamplesetstheDCEtowait20secondsforastatusenquiryfromtheDTEbefore
declaringanerrorevent:
XSR(config)#interface serial 1/0
XSR(config-if<S1/0>)#encapsulation frame-relay
XSR(config-if<S1/0>)#frame-relay intf-type dce
XSR(config-if<S1/0>)#frame-relay lmi-t392dce 20
frame-relay lmi-n392dce
ThiscommandsetstheerrorthresholdonaDataCommunicationsEquipment(DCE)interface.
Syntax
frame-relay lmi-n392dce threshold
Syntax of the “no” Form
Thenoformofthiscommandremovesthecurrentsetting:
no frame-relay lmi-n392dce
Default
3
events IntervaltowaitforaStatusEnquiry,rangingfrom5to30seconds.
threshold Errorthreshold,rangingfrom1to10.