Enterasys Networks XSR CLI sub-interface

Frame Relay Map Class Commands
XSR CLI Reference Guide 9-101
Example
ThefollowingexamplespecifiesHighPriorityasthepolicyfortheclassmap:
XSR(config-map-class)#service-policy out HighPriority
shutdown
Thiscommanddisablesaninterfaceorsub‐interface.Asub‐interfaceisshutdown(nolonger
passingdata)whenoneofthefollowingoccurs:
•Anexplicitshutdowncommandisenteredonthesub‐interface.
•AshutdowncommandisissuedontheparentFrameRelayinterfaceofthissub‐interface.
•AshutdowncommandisissuedonaT1controller.
Syntax
shutdown
Syntax of the “no” Form
Usethenocommandtoenabletheinterfaceafteritisshutdown:
no shutdown
Mode
Interfaceconfiguration:XSR(config-if<xx>)#
sub-interface
Thiscommandstartsconfigurationforasub‐interfaceonaserialinterface.Youcanconfigureup
to50sub‐interfacesontheXSR.
Syntax
interface serial interface_id.sub-interface_num [multi-point | point-to-point
Mode
Globalconfiguration:XSR(config)#
Next Mode
Sub‐interfaceconfiguration:XSR(config-if<xx>)#
interface_id.sub-
interface-num
Thesub‐interface,comprisedofinterface_numandnumericalvalues.
Theentitiesareseparatedbyaperiod“.”Thenumberrangeis1to50.
multi-point Thesub‐interfaceactsasamulti‐pointconnection,sothatmultiple
DLCIscanbedefinedwithinthissub‐interfacetoconnecttomultiple
remotesites.
point-to-point Thesub‐interfaceactsasapoint‐to‐pointconnection.