Enterasys Networks XSR CLI privilege, AAA Method Commands aaa method

AAA Method Commands
XSR CLI Reference Guide 16-101
privilege
Thiscommandconfigurestheprivilegelevelofauser.ItisavailablefrombothAAAUserand
AAAGroupconfigurationmodes.ComparethiscommandwiththeInterfacemodeprivilege
commandonpage111.
Syntax
privilege level (0-15)
Syntax of the No Form
Usethenoformofthiscommandtorestoretheprivilegeleveldefault:
no privilege
Default
0
Mode
AAAUser/Groupconfiguration:XSR(aaa-user)# or XSR(aaa-group)#
Example
Thefollowingexamplespecifiesaprivilegelevelof15foruserkramer:
XSR(config)#aaa user kramer
XSR(aaa-user)#privilege 15
AAA Method Commands
aaa method
ThiscommandisexecutedattheGlobalMode.
ThiscommandconfigurestheAAAmethod(plug‐in)tobeused.Thefollowingsub‐commands
areavailableinAAAMethodmode:
•acct-port - SetstheUDPportforaccountingrequests.Refertopage16‐103forthe
commanddefinition.
•address - SpecifiestheRADIUSserveraddresswitheitherahostnameorIPaddress.Refer
topage16‐103forthecommanddefinition.
•attempts - SetsthenumberofconsecutiveloginattemptsthatmustfailbeforetheRADIUS
methodʹsbackupmethodisused.Refertopage16‐104forthecommanddefinition.
•auth-port - SpecifiestheUDPportforauthenticationrequests.Refertopage16‐104forthe
commanddefinition.
•backup‐SpecifiesanameforabackupRADIUSmethodname.Refertopage16‐105forthe
commanddefinition.
level Specifiestheprivilegelevel(0‐15)associatedwiththisuser.