Enterasys Networks XSR CLI Configuring IP Multicast

XSR CLI Reference Guide 7-83
7
Configuring IP Multicast
Observing Syntax and Conventions
TheCLIcommandsyntaxandconventionsusethenotationdescribedbelow.
IGMP and Generic Multicast Commands
ThefollowingcommandsetsdefineIPMulticastfunctionalityontheXSR,including:
•“PIMCommands”onpage 7‐89.
•“IGMPClearandShowCommands”onpage 7‐95.
ip multicast-routing
Thiscommandenables/disablesmulticastroutingandmulticastswitching.
Syntax
ip multicast-routing
Convention Description
xyz Key word or mandatory parameters (bold)
[x][ ] Square brackets indicate an optional parameter (italic)
[x | y | z][ | ] Square brackets with vertical bar indicate a choice of values
{x | y | z}{ | } Braces with vertical bar indicate a choice of a required value
[x {y | z} ] [{ | } ] Combination of square brackets with braces and vertical bars indicates
a required choice of an optional parameter
(config-if<xx>)xx signifies the interface, class map, policy map or other value you specify;
e.g., F1, G3, S2/1.0, <Your Name>. F indicates a FastEthernet, and G a
GigabitEthernet interface.
Next Mode entries display the CLI prompt after a command is entered.
Sub-commands are displayed in red text.
soho.enterasys.com Italicized, non-syntactic text indicates either a user-specified entry or text with
special emphasis