Enterasys Networks XSR CLI show ip ospf virtual-links

OSPF Debug and Show Commands
XSR CLI Reference Guide 5-121
Sample Output
Thefollowingaresampleresponses:
XSR#show ip ospf neighbor
ID Pri State Dead Intvl Address Address
10.7.7.1 1 FULL 40 10.5.6.1 FastEthernet6
10.0.0.1 1 FULL 40 10.1.1.1 FastEthernet3
XSR#show ip ospf neighbor detail
Neighbor 10.7.7.1 interface address 10.5.6.1
In the area 0.0.0.0 via FastEthernet6
Neighbor priority is 1, state is FULL.
Options 1
Dead interval is 40 sec(s)
Link state retransmission interval is 5 sec(s)
Neighbor 10.0.0.1, interface address 10.1.1.1
In the area 0.0.0.0 via FastEthernet3
Neighbor priority is 1, State is FULL
Options 1
Dead interval is 40 sec(s)
Link state retransmission interval is 5 sec(s)
Parameter Description
show ip ospf virtual-links
Thiscommanddisplaysdataaboutvirtuallinksconfiguredonarouter.
Syntax
show ip ospf virtual-links
Mode
EXECorGlobalconfiguration:XSR> or XSR(config)#
ID RouterIDoftheneighbor.
Pri Priorityoftheneighboroverthisinterface.
State OSPFcommunicationstatewithfollowedbytheinterfacestatusoftheneighbor.
DeadIntvl IntervalthisrouterwillwaitwithoutreceivingaHellopacketfromaneighbor
beforedeclaringaneighborasbeingdown.
Address IPaddressoftheneighborovertheinterface(seenextfield).
Interface InterfaceofthisrouteroverwhichithasneighborsidentifiedbytheneighborID.
Inthearea Areaoverwhichthisrouterisaneighbor.
Options DecimalequivalentoftheE‐bitfromtheoptionsfield.0indicatestheareaisastub
area,2indicatestheareaiscapableofacceptingexternalLSAs(notastub).