Enterasys Networks XSR CLI dialer persistent, dialer redialer attempts

DOD/BOD Commands
XSR CLI Reference Guide 10-101
Example
ThefollowingexampleconfiguresanexthopIPaddress,SPC,hostnameandlinespeedformap
classAcmeMap:
XSR(config)#dialer map 1
XSR(config-if<D1>)#dialer map ip 192.168.57.9 class AcmeMap name AcmeHost spc
speed 56 12345:6789
dialer persistent
Thiscommandbringsupapermanentswitchedconnectionintheabsenceofaninterestingpacket
orprimary‐line‐downbackupdialtrigger.
Syntax
dialer persistent [delay n]
Syntax of the “no” Form
Thenoformofthiscommanddeletesthepersistentsetting:
no dialer persistent
Mode
DialerInterfaceconfiguration:XSR(config-if<Dx>)#
Default
‐1second
Example
ThefollowingexampleconfiguresDialerinterface57tobepersistentfortwominutes:
XSR(config)#interface dialer 57
XSR(config-if<D57>)#dialer persistent 120
dialer redialer attempts
Thiscommandsetstheredialtriggerafterfaileddialattempts.Withaninfinitenumberof
specifiedredialattempts,itispossibletophysicallyconnectamodematanytimeaftersettingthe
dialtriggerandstillmakeaconnection.Also,ifmoreresources(interfaces)areavailableinthe
dialerpool,thedialerisfreetoredialallmembersofthepool.
Syntax
dialer redial attempts n interval m re-enable t [forever]
nInterval that the dial-out process is delayed after the Dialer interface boots up,
ranging from 1 to 2147483 seconds.
attempts Redial attempts.