Enterasys Networks XSR CLI ip rip receive version

RIP Commands
XSR CLI Reference Guide 5-129
Figure 5-3 Offset Example
ip rip receive version
ThiscommandsetsRIPv1orv2forupdatepacketsreceivedontheport.
Syntax
ip rip receive version [1] [2]
Syntax of the “no” Form
ThenoformofthiscommandrestoresthedefaultversionoftheRIPmoduleupdatepacketsthat
areacceptedontheinterface:
no ip rip receive version
Mode
Interfaceconfiguration:XSR(config-if<xx>)#
Default
AcceptbothRIPversion1and2
Example
ThisexamplesetsbothRIPversions1and2forupdatepacketsreceivedonFastEthernetport1:
XSR(config)#interface fastethernet 1
XSR(config-if<F1>)#ip rip receive version 1 2
Serial 1/1
Backup
Distance Router 1-Router x2+1 hops
Router x
Router 1
INTERNET
INTERNET
Distance Router1-Rx2 hops
Serial 1/0
1RIPversion1.
2RIPversion2.