Enterasys Networks XSR CLI show dialer maps

Dialer Interface Clear and Show Commands
XSR CLI Reference Guide 10-91
Example
XSR#show dialer 1
Sample Output
Thefollowingissampleoutputfromtheshow dialer commandforadialerinterface:
#show dialer 5
Dialer5
Dialer state is: UP
Wait for carrier default: 60, default retry: 3
Dial String Success Failures Map Class
3200 2 0
Dialer pool 23
(Serial 2/0:0, )
Parameter Descriptions
show dialer maps
Thiscommanddisplaysdialerpolicies.
Syntax
show dialer maps
Mode
EXEC:XSR#
Sample Output
Thefollowingissampleoutputfromtheshow dialer maps command:
Dialer maps configured on Interface <Dialer1>:
Next hop IP address: <10.10.10.2>
Remote host: <robo2>
Map class: <isdn>
Dialer1 Nameofthedialerinterface.
Waitforcarrier(30secs) Secondstowaitforcarriersignal.
Defaultretry Numberofdefaultcallretries.
DialString Dialstringstousedtomakecalls.
Successes Numberofsuccessfulconnections.
Failures FailedConnections.
MapClass Nameofassociatedmapclass.
Dialerpool2,priority0Indicatesthatthisinterfaceisamemberofdialerpool2withapriority
of0inthatpool.
Serial0 Typeofinterface.