Enterasys Networks XSR CLI rtr schedule

RTR-mode Commands
1-44 Network Management
Default
Quota:700
Example
ThefollowingexampleregisterstheRTRowner:
XSR(config)#rtr owner operator1 192.168.57.5 email larrycurtis@enterays.com quota 1000
rtr schedule
ThiscommandschedulesanResponseTimeReporter(RTR)entry.
Syntax
rtr schedule operation-id [[life {forever | lifetime}] start-time
{hh:mm:[ss][month day | day month] | pending | now | after hh:mm:ss}]
Mode
Globalconfiguration:XSR(config)#
Default
pending
Example
ThefollowingexampleschedulestheRTRmeasurementimmediately:
XSR(config)#rtr schedule 1 now
operation-id MeasurementIDnumber,rangingfrom1to2,147,483,647.
lifetime Entrylifespan,rangingfrom1to2,147,483,647seconds.
hh:mm:ss Timeinhours,minutesandseconds.
day Dayofthemonth.
month Monthoftheyear.
pending Operationwillnotbegin.ThisstateismeaningfulwhenusedbySNMP.
Afteranentryisscheduled,allsupportedmetricsmeaningfultothe
protocoltypewillbemeasured.