Enterasys Networks XSR CLI netbios-name-server

DHCP Commands
XSR CLI Reference Guide 15-99
netbios-name-server
ThiscommandconfiguresNetBIOSWindowsInternetNamingService(WINS)nameserversthat
areavailabletoMicrosoftDHCPclients.Dependingontheclientconfigurationinheritance,the
commandshouldbeusedfromthepropermode.Ifitisspecifiedfrommultiplemodes,an
overridemechanismchoosestheinnermostconfigvalue,withhostasinnermost,thenclient‐class
andpoolasthemostgeneral.
Syntax
netbios-name-server address [address2...address8]
Syntax of the “no” Form
UsethenoformofthiscommandtoremovetheNetBIOSnameserverlist:
no netbios-name-server
Mode
DHCPPool,Host,orClientClassconfigmode:XSR(config-dhcp-pool)#, XSR(config-dhcp-
host)# or XSR(config-dhcp-class)#
Example
ThefollowingexamplespecifiestheIPaddressofaNetBIOSnameserveravailabletoaMicrosoft
DHCPclientinthesubnet:
XSR(config-dhcp-pool)#netbios-name-server 13.12.1.90
ThefollowingexamplespecifiestheIPaddressofaNetBIOSnameserveravailabletothe
MicrosoftDHCPclientwithclientidentifier1111.2222.3333.4444:
XSR(config-dhcp-pool)#client-identifier 1111.2222.3333.4444
XSR(config-dhcp-host)#netbios-name-server 13.12.1.90
ThefollowingexamplespecifiestheIPaddressofaNetBIOSnameserveravailabletoaMicrosoft
DHCPclientintheclientclassengineering:
XSR(config-dhcp-pool)#client-class engineering
XSR(config-dhcp-class)# netbios-name-server 13.12.1.90
address IP address of a NetBIOS WINS server. One address is needed.
address2 ..
address8
Specifies up to eight addresses in the command line listed in order of preference
(NetBIOS name server address has the highest priority, then server address2, etc.