Enterasys Networks XSR CLI snmp-server tftp-server-list, snmp-server trap-source

snmp-server Commands
1-28 Network Management
snmp-server tftp-server-list
ThiscommandspecifiesanAccessControlList(ACL)tolimitTFTPservers’accessduringSNMP
downloads.
Syntax
snmp-server tftp-server-list access-list-num
Syntax of the “no” Form
ThenoformremovesanyACLlimitingotherTFTPservers’accessduringSNMPdownloads:
no snmp-server tftp-server-list
Mode
Globalconfiguration:XSR(config)#
Example
ThefollowingexamplelimitsTFTPserverstoACL#57:
XSR#snmp-server tftp-server-list 57
snmp-server trap-source
Thiscommandsetstheinterfaceservingasthesourceforalltrapsandinforms.Usetheaddressof
theinterfacefromwhichthetrap/informgoesoutasthesourceaddressforthetrap/inform.
Syntax
snmp-server trap-source {interface}
Syntax of the “no” Form
Thenoformofthiscommandremovestheconfiguredtrapinterface:
no snmp-server trap-source
Example
ThisexamplespecifiesGigabitEthernetinterface2asthetrapsource:
XSR#snmp-server trap-source g2
access-list-num StandardACLrangingfrom1to99.
interface AsupportedinterfacesuchasFastEthernet1.
Note: If the interface does not have an IP address or if the interface is deleted afterwards, it will use
the address of the interface from which the trap/inform goes out as the source address for the trap/
inform.