Enterasys Networks XSR CLI show dialer sessions

Dialer Interface Clear and Show Commands
10-92 Configuring the Dialer Interface
Phone numbers: <2400:12>
Connection speed/type: <64k>/<On Demand>
Dialer maps configured on Interface <Dialer2>:
Next hop IP address: <20.20.20.2>
Phone numbers: <2400>
Connection speed/type: <not set>/<On Demand>
show dialer sessions
Thiscommanddisplaysinformationregardingdialersessions.
Syntax
show dialer sessions
Mode
EXEC:XSR#
Sample Output
Thefollowingissampleoutputfromtheshow dialer sessionscommand:
XSR#show dialer sessions
ID Interface Type State MLPPP Phone# Phys Intf
0001 Dialer1 On Demand IDLE 001
0002 Dialer1 Multilink CONNECTED 001 3100 Serial 2/0:30
0003 Dialer1 Incoming CONNECTED 001 Serial 2/0:12
0004 Dialer0 On Demand WAITING 000 2600 D-Serial 1/0:0
Parameter Descriptions
ID DialsessionIDnumber‐node‐wideandunique.Range:1to512.
Interface Dialerinterfacenumberwhichhasrequestedthedialsession.
Type Dialsessiontype:
•Ondemand:sessionthathandlesondemandconnectionrequests
•Backup:sessionwhichisrequestedbyabackedupinterfaceor
watchedroute
•Multilink:dialsessionrequestedbyamultilinkgroupusedfor
backuporondemand
•Callback:dialcallbacksession.
•Bandwidth:aBandwidthonDemandrequestedconnection.
State IDLE,WAITING,CALLINGorCONNECTED.
MLPPP MLPPPgroupnumbertowhichthedialsessionbelongs.
PhoneNo Numberusedtodialout.
PhysIntf Dialerpoolportusedtobuildaswitchedlinkwithremotepeer.