Enterasys Networks XSR CLI show ip pim interface

IGMP Clear and Show Commands
7-100 Configuring IP Multicast
Example
Thefollowingexampledisplayssampleresponses:
XSR>#show ip pim bsr
PIMv2 Bootstrap information
This system is the Elected Bootstrap Router (BSR)
BSR address: 192.168.27.1
Uptime: 04:37:46, BSR Priority: 4, Hash mask length: 30
Next bootstrap message in 00:00:03 seconds
This system is the Candidate Bootstrap Router (CBSR)
Candidate BSR Address: 50.0.0.30 Priority: 0, Hash Mask Length: 30
Parameters in the Response
show ip pim interface
ThiscommanddisplaysdataaboutinterfacessetforProtocolIndependentMulticast(PIM).
Syntax
show ip pim interface [type number]
Mode
EXECconfiguration:XSR>
Example
Thefollowingexampledisplaysampleresponses:
XSR>show ip pim interface
PIM Interface Table
Address Interface Nbr Count Hello Intvl DR
30.0.0.20 FastEthernet1 0 30 30.0.0.20
40.0.0.20 FastEthernet2 2 30 40.0.0.40
BSRaddressIPaddressofthebootstraprouter.
Uptime IntervalthatthisXSRhasbeenup,inhours:minutes:seconds.
BSRPriority Priorityassetbytheip pim bsr-candidatecommand.
HashmasklengthLengthofamask(32bitsmaximum)thatistobeANDedwiththe
groupaddressbeforethehashfunctioniscalled.Thisvalueis
configuredbythe ip pim bsr-candidatecommand.
Nextbootstrapmessagein Period(inhours:minutes:seconds)inwhichthenextbootstrap
messageisduefromthisBSR.
type Interfacetype.
number Interfacenumber.