Enterasys Networks XSR CLI dialer called, dialer caller

DOD/BOD Commands
10-98 Configuring the Dialer Interface
Example
ThefollowingexamplemapsACL1350todialerlist57:
XSR(config)#access-list 57 permit ip 0.0.0.0 255.255.255.255 255.255.255.255 0.0.0.0
XSR(config)#dialer-list 57 protocol ip list 1350
dialer called
Thiscommandmapsincomingcallstooneofthedialerinterfaces.Amaximumnumberof32
callednumbersperdialerinterfacecanbeconfigured.
Syntax
dialer called DNIS:subaddress
Syntax of the “no” Form
Thenoformofthiscommandremovestheconfigurednumber:
no dialer called DNIS:subaddress
Mode
DialerInterfaceconfiguration:XSR(config-if<Dx>)#
Example
ThefollowingexampleconfiguresadialerprofileforareceiverwithDNIS12345andISDN
subaddress6789:
XSR(config)#interface dialer 1
XSR(config-if<D1>)#dialer called 12345:6789
dialer caller
ThiscommandconfigurescallerIDscreeningwithanoptionprovidingISDNcallback.TheXSR
willacceptcallsfromaspecifiedphonenumber.Amaximumof32callernumberscanbesetper
dialerport.
Thecommandmatchesnumbersstartingwiththeleastsignificantdigitsofthecallingnumber,
startingfromthelastdigit.TypicallytheISDNswitchdoesnotprovidethecompletecalling
number,onlythelocalnumber(fourtosevenoftheleastsignificantdigits).
Thedialednumbermustbe���configuredintheDialerinterface.
Syntax
dialer caller number [callback]
DNIS:subaddress Dialed Number Identification Service, or the called party number, a colon, and
the ISDN subaddress.
number Phone number to screen. Limit: 32 characters.
callback Returns the call to the dialer. This option applies to DoD applications and supports
PPP and MLPPP. If used in a backup capacity, set the number of retries to 1.