Enterasys Networks XSR CLI ip firewall logging

Firewall Feature Set Commands
16-120 Configuring Security
Syntax of the “no” Form
ThenoformofthiscommandcancelsascheduledloadandunlocksthefirewallconfigCLI:
XSR(config)#no ip firewall load delay
Mode
Globalconfiguration:XSR(config)#
Examples
Thefollowingexampleverifiesthefirewallconfigurationiscorrect:
XSR(config)#ip firewall load trial
Thisexampleschedulesaloadinfivedays,threehoursand20minutes:
XSR(config)#ip firewall load delay 5 03:20
Aftertheloadisperformed,thefollowingmessagewilldisplay:
XSR(config)#<186>Mar 17 22:30:22 10.10.10.20 FW: Firewall Shutdown and Restarted
<186>Mar 17 22:30:22 10.10.10.20 FW: Firewall: The Firewall has just executed a
delayed load command successfully
ip firewall logging
Thiscommanddefinesloggingobjectparametersthatapplytothefirewalllogoperation.Logging
iscumulative.Forexample,byselectingLevel3,thefirewallwillgenerateallmessagesfrom
Levels3to0.IfyousetloggingtoLevel0,thenumberofmessageswillbeminimal.
Levels0to3aredesignatedforattacks,deniesandothersystem‐relatedlogssuchasmemory
failures.Levels4to7aredesignatedforpermits,warningsandotherinformationallogs.Thereare
veryfewdebuglevellogssoinordertoseepermitsasettingof5or6issufficient.
enable disable Executesorterminatesthefirewallload.
Note: If the command is issued when a load delay is pending, the following error message displays:
Load: Configuration locked due to scheduled load delay