Enterasys Networks XSR CLI Dialer Interface Clear and Show Commands clear dialer, show dialer

Dialer Interface Clear and Show Commands
10-90 Configuring the Dialer Interface
Syntax of the “no” Form
Thenoformofthiscommandremovesthemodem‐init‐string:
no modem-init-string
Mode
Map‐ClassDialerconfiguration:XSR(config-map-class<xx>)#
Example
Thefollowingexamplespecifiesamodeminitializationstringtodisabledialtonedetectionforthe
MapClassRemote:
XSR(config-map-class<Remote>)#modem-init-string ATX3
Dialer Interface Clear and Show Commands
clear dialer
Thiscommandclearsdialerstatisticsforphysicalinterfacesconnectedtothedialerinterfaces.If
theinterfaceisnotspecified,allinterface(forthedialer)statisticswillbecleared.
Syntax
clear dialer
Mode
PrivilegedEXEC:XSR#
Example
XSR#clear dialer
show dialer
Thiscommanddisplaysgeneralinformationandsomeconfigurationsofinterfacesconfigured
underthedialer;forinstance,thedialerinterfacesandtheserialandasyncinterfacesunderthe
dialerinterfaces.
Syntax
show dialer [number]
Mode
PrivilegedEXEC:XSR#
number Interface number.