Enterasys Networks XSR CLI show ip route

IP Clear and Show Commands
5-174 Configuring the Internet Protocol
Sample Output
Thefollowingissampleoutputfromthecommand:
XSR>show ip proxy-dns cache
Name Age(sec)
www.enterasys.com 100
www.test.com 10
Parameter Description
show ip route
ThiscommanddisplaysinformationabouttheRoutingTableincludingroutetypes,IPaddresses,
andcosts.AdministrativedistancesarereferencedineachRoutingTableentrywithinthebrackets
asfollows:[distance/metric].Thecommandalsodisplaysallalternativerouteswheremorethan
onerouteexiststoadestination.
Syntax
show ip route [connected | address [mask [longer-prefixes]]| bgp | ospf | rip |
static]
Mode
EXECorGlobalconfiguration: XSR> or XSR(config)#
Defaults
•LAN(FastEthernet1,2)interfacecost:10
•Serialinterfacecost:64
Name DesignationoftheDNSquery.
Age Secondsremainingforthelifetimeofthecache.
connected Showsonlyconnectedroutes.
address Addressaboutwhichroutingdatawillbeshown.
mask Argumentforasubnetmask.
longer-prefixes Theaddressandmaskpairbecomesaprefixandanyroutesthatmatch
theprefixaredisplayed.
bgp ShowsBGProutes.
ospf ShowsOSPFroutes.
rip ShowsRIProutes.
static Showsstaticroutes.
Note: Bracketed values indicate route distance and cost, where the first value is distance and the
second is cost. For example, [120/0003] indicates a distance of 120 (the default distance for RIP)
and a cost of 3.