III PERIPHERAL BLOCK: MONITORED MOBILE ACCESS INTERFACES
SDRI, SURI, SDCTS, SUCTS, SDDCD, SUDCD, SDDSR, SUDSR: Modem status (D[7:0]) / Communications block
|
| modem status register (0x020002A) |
For reads, these bit pairs indicate changes in the input level for the corresponding status bit. | ||
SDRI; | Read "1": | RI status has changed from "1" to "0" |
| Read "0": | RI status hasn't changed from "1" to "0" |
SURI; | Read "1": | RI status has changed from "0" to "1" |
| Read "0": | RI status hasn't changed from "0" to "1" |
Writing "1" to a bit resets it to "0." Writes of "0" are ignored. | ||
SDRI; | Write "1": | SDRI status is reset |
| Write "0": | Invalid |
SURI; | Write "1": | SURI status is reset |
| Write "0": | Invalid |
There is a modem status change interrupt request when a bit goes to "1" if the corresponding bit in the communications block modem status interrupt enable register enables such interrupts.
EDRI: Enable communications block SDRI modem status change interrupt (D7) / Communicationsblock modem status interrupt enable register (0x020002C)
EURI: Enable communications block SURI modem status change interrupt (D6) / Communicationsblock modem status interrupt enable register (0x020002C)
EDCTS: Enable communications block SDCTS modem status change interrupt (D5) / Communications block modem status interrupt enable register (0x020002C)
EUCTS: Enable communications block SUCTS modem status change interrupt (D4) / Communications block modem status interrupt enable register (0x020002C)
EDDCD:Enable communications block SDDCD modem status change interrupt (D3) / Communications block modem status interrupt enable register (0x020002C)
EUDCD:Enable communications block SUDCD modem status change interrupt (D2) / Communications block modem status interrupt enable register (0x020002C)
EDDSR: Enable communications block SDDSR modem status change interrupt (D1) / Communications block modem status interrupt enable register (0x020002C)
EUDSR: Enable communications block SUDSR modem status change interrupt (D0) / Communications block modem status interrupt enable register (0x020002C)
Enable or disable interrupt generation by the factors corresponding Communications block modem status interrupt enable register (SDRI, SURI, SDCTS, SUCTS, SDDCD, SUDCD, SDDSR, or SUDSR).
Write "1": Interrupt enabled
Write "0": Interrupt disabled
DTR, RTS: Modem control (D[1:0]) / Communications block modem control register (0x020002E)
For the communications macro select (MCRS) register (D[1:0]/0x0200000) setting of
Table 10.20 Communications Block Modem Control
Bit Setting | Output Pin | Output Level |
RTS = 1 | RTS | High |
RTS = 0 |
| Low |
DTR = 1 | DTR | High |
DTR = 0 |
| Low |
EPSON | S1C33210 FUNCTION PART |