Using the command line interface

NAT/Route mode installation

 

 

3Set the IP address and netmask of interface 2 to the external IP address and netmask that you recorded in Table 10 on page 45.

set system interface port2 mode static ip <IP_address> <netmask>

Example

set system interface port2 mode static ip 204.23.1.5 255.255.255.0

4Set the IP address and netmask of interface 3 or 4 to the IP addresses and netmasks that you recorded in Table 10 on page 45.

set system interface <interface_name> mode static ip <IP_address> <netmask>

Example

To set the IP address of interface 3 to 192.45.56.73 and netmask to 255.255.255.0, enter

set system interface port3 mode static ip 192.45.56.73 255.255.255.0

5Confirm that the addresses are correct. Enter:

get system interface

The CLI lists the IP address, netmask and other settings for each of the FortiGate interfaces.

6Set the primary DNS server IP addresses. Enter

set system dns primary <IP address>

Example

set system dns primary 293.44.75.21

7Optionally, set the secondary DNS server IP addresses. Enter

set system dns secondary <IP address>

Example

set system dns secondary 293.44.75.22

8Set the default route to the Default Gateway IP address.

set system route number <route_no> dst 0.0.0.0 0.0.0.0 gw1 <gateway_ip>

Example

set system route number 0 dst 0.0.0.0 0.0.0.0 gw1 204.23.1.2

48

Fortinet Inc.

Page 48
Image 48
Fortinet 400 manual Set system interface port2 mode static ip IPaddress netmask