Intel 210200-002 manual Absolute Maximum RATINGS·

8282/8283

ABSOLUTE MAXIMUM RATINGS·

Temperature Under Bias	O·Cto 70·C
Storage Temperature	- 65·Cto + 150·C
All Output and Supply Voltages	- 0.5V to + 7V
All Input Voltages	-1.0V to + 5.5V
Power Dissipation	1 Watt

·NOTlCE: Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional opera- tion of the device at these or any other conditions above those indicated in the operational sections of this specifi- cation is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

D.C. CHARACTERISTICS (Vee = 5V ±10%, TA = O"C to 70"C)

Symbol	Parameter	Min.'	Max.	Units	Test Conditions
Vc	Input Clamp Voltage		-1	V	Ic =	-5 mA
Icc	Power Supply Current		160	mA
IF	Forward Input Current		-0.2	iliA	VF =	0.45V
IR	Reverse Input Current		50	,.A	VR =	5.25V
VOL	Output low Voltage		.45	V	IOl = 32 mA
VOH	Output High Voltage	2.4		V	IOH =	-5 mA
IOFF	Output Off Current		±50	,.A	VOFF = 0.45to5.25V
Vil	Input low Voltage		0.8	V	Vcc =5.0V		See Note 1
VIH	Input High Voltage	2.0		V	Vcc=5.0V		See Note 1
	Input Capacitance				F= 1 MHz
CIN			12	pF	VBIAS =2.5V, Vcc=5V
					TA=25·C

NOTE:

1.Output Loading IOL=32mA, IOH= -5mA, CL=300pF.

A.C. CHARACTERISTICS (Vee = 5V ±10%, TA = O"C to 70·C

loading: Outputs -IOl = 32 mA, IOH = -5 mA, CL = 300 pF)

Symbol	Parameter
TIVOV	Input to Output Delay
	-Inverting
	-Non·lnverting
TSHOV	STB to Output Delay
	-Inverting
	-Non·lnvertlng
TEHOZ	Output Disable Time
TElOV	Output Enable Time
TIVSl	Input to STB Setup Time
TSLIX	Input to STB Hold Time
TSHSl	STB High Time
TILlH, TOlOH	Input, Output Rise Time
TIHll, TOHOl	Input, Output Fall Time

NOTE:

1. See waveforms and test load circuit on following page.

Min.	Max.	Units	Test Conditions
	22		(See Note 1)
5		ns
5	30	ns
10	40	ns
10	45	ns
5	18	ns
10	30	ns
0		ns
25		ns
15		ns
	20	ns	From O.BV tq 2.0V
	12	ns	From 2.0V to O.BV

74 AFN.Q0727C