Intel mcs-48 manual UPP-1P3, MDS-EM2

EM2

On the EM2 Board:

the Intel® 8755A EPROM can be programmed using any o/the modules listed in Table 1.

The 8755A EPROM is erased when exposed to light with wavelengths shorter than approximately 4000 Ang- stroms (A). Sunlight and certain fluorescent lamps have wavelengths in the 3000A to 4000A range. If the 8755A is to be exposed to sunlight or room fluorescent lighting

Module

UPP-1P3

. PROMPT-48 .

Description

Universal PROM Programmer. Requires UPP-955, which in- cludes 8755A Personality Card with 40-pin adapter socket.

Intellec® MCS-48 Microcom-

puter Design Aid. Requires

PROMPT-475 Programming

Adapter.

for extended periods, then opaque labels should be placed over the window to prevent unintentional erasure.

The recommended erasure procedure is exposure to ultraviolet light which has a wavelength of 2537A. The integrated dose (UV intensity multiplied by exposure time) for erasure should be a minimum of 15W-sec/cm.

PI'lOMPT-80/85 Intellec® 8080/8085 Microcom-

puter Design Aid. Requires

PROMPT-975 Programming

Adapter.

Table 1_ 8755A Proramming Module

The erasure time with this dosage is approximately 15 to 20 minutes using an ultraviolet lamp with a 12,000" W/em 2 power rating. Place the 8755A within one inch of the lamp during erasure. Some lamps include a filter which should be removed before erasure.

SPECIFICATIONS		Physical Characteristics
Operating Environment		Width: 2.75 in. (6.98 cm)
		Height: 4.25 in. (10.79 cm)
.Intef" 8755A EPROM Programming		Depth: 1.5 in. (3.81 cm)
UPp:103		Weight: 0.5 Ib (0.23 kg)
"'ROMPT-48		Electrical Characteristics
PI'IOMPT-80/85
lntellec Microcomputer Development System		DC Power
		Vcc=5V ±5%
Software
		Icc = 300 mA (maximum)
8048 Assembler
ISIS-II Diskette Operating System		Environmental Characteristics
Equipment Supplied		Operating Temperature -	0 to 55°C
EM2 Printed Circuit Board		Operating Humidity -	Up to 95% relative humidity
EM2 Reference Manual		without condensation
ORDERING INFORMATION
Part Number	Description
MDS-EM2	8022 Emulation Board

10-22 AFN-00800A-03