![](/images/new-backgrounds/1179718/179718447x1.webp)
Administrator’s Handbook
Overview
The CLI has two major command modes: SHELL and CONFIG. Summary tables that list the commands are provided below. Details of the entire command set follow in this section.
| SHELL Commands |
|
|
|
|
Command | Status and/or Description |
arp | to send ARP request |
atmping | to send ATM OAM loopback |
clear | to erase all stored configuration information |
clear_certificate | to remove an SSL certificate that has been installed |
clear_log | to erase all stored log info in flash memory |
configure | to configure unit's options |
diagnose | to run |
download | to download config file |
etheroam | to show Ethernet OAM info |
exit | to quit this shell |
help | to get more: “help all” or “help help” |
install | to download and program an image into flash |
license | to enter an upgrade key to add a feature |
log | to add a message to the diagnostic log |
loglevel | to report or change diagnostic log level |
netstat | to show IP information |
nslookup | to send DNS query for host |
ping | to send ICMP Echo request |
quit | to quit this shell |
reset | to reset subsystems |
restart | to restart unit |
show | to show system information |
start | to start subsystem |
status | to show basic status of unit |
telnet | to telnet to a remote host |
traceroute | to send traceroute probes |
upload | to upload config file |
view | to show configuration information |
voip | to show VoIP info |
who | to show who is using the shell |
|
|