Motorola 3342, 7000, 3352N, 2200 manual Config Commands, Remote ATA Configuration Commands

CONFIG Commands

This section describes the keywords and arguments for the various CONFIG commands.

Remote ATA Configuration Commands

Motorola Netopia® firmware supports configuration of a maximum of four Motorola Netopia® ATA profiles, which are stored in the Gateway’s configuration database. When a Motorola Netopia® ATA is discovered, the Gateway compares the MAC address of the ATA with one of the existing profiles stored in the database. If there is a match, the configuration is downloaded to the Motorola Netopia® ATA, and the ATA is restarted. Once the Motorola Netopia® ATA is restarted, it comes up with the newly downloaded configuration.

set ata profile [ 0... 3 ] ata-option [ on off ]

Enables or disables the remote ATA configuration option for the specified ATA configuration profile to be stored in the Gateway.

set ata profile [ 0... 3 ] ata-mac-addr MAC_addr

Specifies the MAC address of the ATA for the specified configuration profile.

set ata profile [ 0... 3 ] ata-qos-enable [ on off ]

Enables or disables QoS for the specified profile.

set ata profile [ 0... 3 ] ata-dhcpc-enable [ on off ]

Enables or disables DHCP client service for the specified profile.

set ata profile [ 0... 3 ] ata-dhcpc-hostname string

Specifies a DHCP client hostname for the specified profile.

set ata profile [ 0... 3 ] ata-dhcpc-vid-enable [ off on ]

Enables or disables a DHCP client vendor ID for the specified profile.

set ata profile [ 0... 3 ] ata-dhcpc-vid string

Specifies a vendor ID for the specified profile when ata-dhcpc-vid-enableis on.

set ata profile [ 0... 3 ] ata-static-wan-ip ip_addr

Specifies a static WAN IP address for the specified profile.

set ata profile [ 0... 3 ] ata-static-wan-subnet-mask subnet_mask

Specifies a static WAN IP subnet mask for the specified profile.

243