VLAN Settings
You can create up to 8 VLANs, and you can also restrict any VLAN, and the computers on it, from adminis- tering the Gateway. See “VLAN” on page 107 for more information.
set vlan name name
Sets the descriptive name for the VLAN. If no name is specified, displays a selection list of node names to select for editing. Once a new VLAN name is specified, presents the list of VLAN characteristics to define.
set vlan name name type [
Specifies VLAN type:
set vlan name name id VID
Specifies VLAN id (VID), when type is set to global. The numerical range of possible VIDs is 1 - 4094. (A VID of zero (0) is permitted on the Ethernet WAN port only.)
set vlan name name admin-restricted [ off on ]
Turns
set vlan name name seg-pbits [ 0 - 7 ]
Specifies the 802.1p priority bit. If you set this to a value greater than 0, all packets of this VLAN with unmarked priority bits (pbits) will be
set vlan name name ports port option [ off on ]
Enables or disables the Gateway’s physical Ethernet, USB or VCC port or wireless SSID for the specified VLAN.
set vlan name name ports port tag [ off on ]
If set to on, packets transmitted from this port through this VLAN must be tagged with the VLAN VID. Pack- ets received through this port destined for this VLAN must be tagged with the VLAN VID by the source. The tag option is only available on global type ports.
set vlan name name ports port priority [ off on ]
Enables or disables the priority for the port assigned to the specified VLAN allowing packet prioritization based on any 802.1p priority bits in the VLAN header to prioritize packets within the Gateway’s internal queues, according to DiffServ priority mapping rules.
set vlan name name ports port promote [ off on ]
Enables or disables the promote setting allowing writing any 802.1p priority bits into the
311
