Motorola 7000, 3352N, 3342, 2200 PPPoE with IPoE Settings, Set wan-over-ether pppoe on off, 282

Administrator’s Handbook

PPPoE with IPoE Settings

Ethernet WAN platforms

set wan-over-ether pppoe [ on off ]

Enables or disables PPPoE on the Ethernet WAN interface.

set wan-over-ether pppoe-with-ipoe [ on off ]

Enables or disables the PPPoE with IPoE support on Ethernet WAN, including VDSL, platforms when pppoe option is set to on.

When pppoe-with-ipoeis set to on, an additional interface, “ethernet C,” becomes available.

set wan-over-ether ipoe-sessions [ 1 - 4 ]

Sets the number of IPoE sessions, up to four, on Ethernet WAN, including VDSL, platforms.

☛NOTE:

Enabling pppoe-with-ipoe disables support for multiple PPPoE sessions.

Example:

set ip ethernet C option on

set ip ethernet C address 0.0.0.0 set ip ethernet C broadcast 0.0.0.255 set ip ethernet C netmask 255.255.255.0

set ip ethernet C restrictions admin-disabled set ip ethernet C addr-mapping on

set ip ethernet C dns acquired-dns-priority 20 set ip ethernet C mcast-fwd on

set ip ethernet C igmp-null-source-addr off set ip ethernet C tx-queue "none"

set ip ethernet C unnumbered off set ip ethernet C rip-receive off set ip ethernet C proxy-arp off set ip ip-ppp enet-B option on

set ip ip-ppp enet-B address 0.0.0.0

set ip ip-ppp enet-B peer-address 0.0.0.0

set ip ip-ppp enet-B restrictions admin-disabled set ip ip-ppp enet-B addr-mapping on

set ip ip-ppp enet-B dns acquired-dns-priority 20 set ip ip-ppp enet-B igmp-null-source-addr off set ip ip-ppp enet-B tx-queue "none"

set ip ip-ppp enet-B mcast-fwd on set ip ip-ppp enet-B unnumbered off set ip ip-ppp enet-B rip-receive off

282