Motorola 2200, 7000, 3352N, 3342 manual License key, Loglevel level, 229

You can include one or more of the following arguments with the download command. If you omit argu- ments, the console prompts you for this information.

•The server_address argument identifies the IP address of the TFTP server from which you want to copy the Motorola Netopia® Gateway configuration file.

•The filename argument identifies the path and name of the configuration file on the TFTP server.

•If you include the optional confirm keyword, the download begins as soon as all information is entered.

You can also download an SSL certificate file from a trusted Certification Authority (CA), on platforms that support SSL, as follows:

download [-cert] [server_address ] [filename] [confirm]

install [server_address] [filename] [confirm]

(Not supported on model 3342/3352)

Downloads a new version of the Motorola Netopia® Gateway operating software from a TFTP (Trivial File Transfer Protocol) server, validates the software image, and programs the image into the Motorola Neto- pia® Gateway memory. After you install new operating software, you must restart the Motorola Netopia® Gateway.

The server_address argument identifies the IP address of the TFTP server on which your Motorola Neto- pia® Gateway operating software is stored. The filename argument identifies the path and name of the operating software file on the TFTP server.

If you include the optional keyword confirm, you will not be prompted to confirm whether or not you want to perform the operation.

license [key]

This command installs a software upgrade key. An upgrade key is a purchased item, based on the serial number of the gateway.

log message_string

Adds the message in the message_string argument to the Motorola Netopia® Gateway diagnostic log.

loglevel [level]

Displays or modifies the types of log messages you want the Motorola Netopia® Gateway to record. If you enter the loglevel command without the optional level argument, the command line interface dis- plays the current log level setting.

You can enter the loglevel command with the level argument to specify the types of diagnostic mes- sages you want to record. All messages with a level number equal to or greater than the level you specify are recorded. For example, if you specify loglevel 3, the diagnostic log will retain high-level informational messages (level 3), warnings (level 4), and failure messages (level 5).

Use the following values for the level argument:

229