Motorola 3352N, 7000, 3342, 2200 manual Link Dhcp Server

Administrator’s Handbook

Link: DHCP Server

Your Gateway can provide network configuration information to computers on your LAN, using the Dynamic Host Configuration Protocol (DHCP).

If you already have a DHCP server on your LAN, you should turn this service off.

If you want the Gateway to provide this service, select Server from the Server Mode pull-down menu, then configure the range of IP addresses that you would like the Gateway to hand out to your computers.

You can also specify the length of time the computers can use the configuration information; DHCP calls this period the lease time.

Your Service Provider may, for certain services, want to provide configuration from its DHCP servers to the computers on your LANs. In this case, the Gateway will relay the DHCP requests from your computers to a DHCP server in the Service Provider's network.

Select Relay-agentand enter the IP address of the Service Provider's DHCP server in the Server Address field. This address is furnished by the Service Provider.

☛NOTE:

The relay-agent option only works when NAT is off and the Gateway is in router mode.

96