Motorola 7000, 3352N, 3342, 2200 manual Set ip ip-ppp vccn rip-receive off v1 v2 v1-compat v2-MD5

set ip ip-ppp [vccn] rip-receive { off v1 v2 v1-compat v2-MD5 }

Specifies whether the Motorola Netopia® Gateway should use Routing Information Protocol (RIP) broad- casts to update its routing tables with information received from other routers on the other side of the PPP link.

If you specify v2-MD5, you must also specify a rip-receive-key. Keys are ASCII strings with a maximum of 31 characters, and must match the other router(s) keys for proper operation of MD5 support.

set ip ip-ppp vccn igmp-null-source-addr [ on off ]

Specifies whether you want the Motorola Netopia® Gateway to identify the source IP address of every IGMP packet transmitted from this interface as 0.0.0.0 when mcast-fwdis set to on. This complies with the requirements of TR-101, and removes the need for a publicly advertised IP address on the WAN interface.

set ip ip-ppp vccn mcast-fwd [ on off ]

Specifies whether you want the Motorola Netopia® Gateway interface to act as an IGMP proxy host.

set ip ip-ppp vccn unnumbered [ on off ]

Specifies whether you want the Motorola Netopia® Gateway to have its WAN interface unnumbered, i.e. set to 0.

set ip ip-ppp vccn dns acquired-dns-priority [ 0 - 255 ]

Sets the priority for DNS acquired via PPP. See “Domain Name System Settings” on page 255 for more information.

265