
set security
Specifies the destination IP address to match packets (where the packet is going).
set security
Specifies the destination IP mask to match packets (where the packet is going).
set security
Specifies the TOS (Type Of Service) value to match packets. The value for tos can be from 0 – 255.
set security
Specifies the TOS (Type Of Service) mask to match packets. The value for
set security
Specifies the protocol value to match packets, the type of
set security
Sets the source compare operator action for the specified filter rule.
Operator | Action |
nc | No compare |
ne | Not equal to |
lt | Less than |
le | Less than or equal to |
eq | Equal to |
ge | Greater than or equal to |
gt | Greater than |