Motorola 2200 Set dhcp range 2.. start-address ipaddress, Set dhcp gen-option name name, 249

set dhcp range [ 2... 8 ] start-address ip_address

Specifies the starting IP address of DHCP range n when subnet n option is on. See “Additional subnets”

on page 262.

set dhcp range [ 2... 8 ] end-address ip_address

Specifies the ending IP address of DHCP range n when subnet n option is on. See “Additional subnets”

on page 262.

set dhcp reserved ip-address x.x.x.x mac-address y-y-y-y-y-y

If you selected server, reserves the specified IP address from the DHCP pool to the specified MAC address. These are list items; a total of 16 reserved addresses are supported. Secondary ranges will all make use of the dhcp lease-timevalue.

DHCP Generic Options

Beginning with Firmware Version 7.7.2, you can specify DHCP Generic Options which allow you to configure the content to be served for particular option numbers.

set dhcp gen-option name name

Specifies a DHCP generic option set named name of one to 15 characters. You can specify up to 20 gen- options. Each can contain up to 100 bytes of data, up to a maximum of 912 bytes of options data total. An option will be served only if the client requests it.

set dhcp gen-option option [ 1 – 255 ]

Specifies the DHCP option by number, 1 – 255. The following table shows the formats and sizes for known options, and whether or not you can configure a gen-optionof that type.

Option		Data Format	Data Size	Can
			(bytes)	Configure
0		Empty	0	No
1		IP mask	4	Yes
2		Unsigned 4 byte integer	4	Yes
3 - 11		IP address list	Multiples of 4	Yes
12		String (up to 100 characters)	N	Yes
13		Unsigned 2 byte integer	2	Yes
14	- 15	String (up to 100 characters)	N	Yes
16		Unsigned 4 byte integer	4	Yes
17		String (up to 100 characters)	N	Yes
18		String (up to 100 characters)	N	Yes
19 - 20		Flag	1	Yes
21		IP address & mask list	Multiples of 8	Yes
22		Unsigned 2 byte integer	2	Yes

249