EMERGENCY NOTIFICATION
The DX4500/DX4600 emergency notification feature sends an emergency report to the designated computer on which the Emergency Agent application is running (for example, alarm or motion event is detected and the ADMINISTRATOR password is changed). This event must be specified using the notification option. For information about configuring the notification option, refer to Notification on page 62.
The emergency notification feature is configured and operates independently of the mail feature. The Emergency Agent application is installed on the remote client computer and is used to display and administer emergency reports. In this case, the DVR can be configured to send emergency reports but not mail. For information about setting up the mail feature, refer to Mail on page 63.
1.In the Setup window, on the front panel or remote control, press the up/down arrow buttons 
to select the Network menu option. Using the mouse, click the Network menu option. The Network page opens.
2.On the front panel or remote control, press ENTER, and then press the up/down arrow buttons 
to select Emergency. Using the mouse, click Emergency. The Emergency properties are displayed. By default, notification is set to OFF.
Figure 67. Emergency Option Properties
3.To enable emergency notification:
a.On the front panel or remote control, press ENTER twice. Using the mouse, click the Notification settings box. The settings box changes color.
b.On the front panel or remote control, press the left/right arrow buttons 
. Using the mouse, right- or left-click the settings box to toggle the setting to ON. The IP Address/Port boxes are available.
Figure 68. Enabling Emergency Notification
66 |
|
